Warning: Trying to access array offset on value of type null in /home/airflight/www/www/wp-content/themes/fluida/includes/loop.php on line 270

Boeing, FAA, Lithium Ion battery

Dreamliner Battery Box Solution

March 14, 2013 March 20, 2013

An upgrade to the battery has been reported, and Boeing is adding a fire-resistant battery box to contain the cells, and insulation around that. The box is to vent smoke outside, and will be made of titanium.

Boeing is still planning on using lithium-ion cells instead of switching to nickel cadmium. The batteries face a series of twenty lab tests before test flights will be permitted.

The two approved test flights include one for the new battery, and one for the new box.

Each Dreamliner has one lithium-ion battery to power cockpit systems, and one to power on-ground functions that used to be hydraulic.

The FAA statement is below:
WASHINGTON, D.C. – The Federal Aviation Administration (FAA) today approved the Boeing Commercial Airplane Company’s certification plan for the redesigned 787 battery system, after thoroughly reviewing Boeing’s proposed modifications and the company’s plan to demonstrate that the system will meet FAA requirements. The certification plan is the first step in the process to evaluate the 787’s return to flight and requires Boeing to conduct extensive testing and analysis to demonstrate compliance with the applicable safety regulations and special conditions.

“This comprehensive series of tests will show us whether the proposed battery improvements will work as designed,” said Transportation Secretary Ray LaHood. “We won’t allow the plane to return to service unless we’re satisfied that the new design ensures the safety of the aircraft and its passengers.”

The battery system improvements include a redesign of the internal battery components to minimize initiation of a short circuit within the battery, better insulation of the cells and the addition of a new containment and venting system.

“We are confident the plan we approved today includes all the right elements to conduct a comprehensive evaluation of the battery system redesign,” said FAA Administrator Michael P. Huerta. “Today’s announcement starts a testing process which will demonstrate whether the proposed fix will work as designed.”

The certification plan requires a series of tests which must be passed before the 787 could return to service. The plan establishes specific pass/fail criteria, defines the parameters that should be measured, prescribes the test methodology and specifies the test setup and design. FAA engineers will be present for the testing and will be closely involved in all aspects of the process.

The FAA also has approved limited test flights for two aircraft. These aircraft will have the prototype versions of the new containment system installed. The purpose of the flight tests will be to validate the aircraft instrumentation for the battery and battery enclosure testing in addition to product improvements for other systems.

The FAA will approve the redesign only if the company successfully completes all required tests and analysis to demonstrate the new design complies with FAA requirements. The FAA’s January 16, 2013 airworthiness directive, which required operators to temporarily cease 787 operations, is still in effect, and the FAA is continuing its comprehensive review of the 787 design, production and manufacturing process.