|

Dassault Falcon Announces 2011 Regional M&O Seminar Series

Similar Posts

  • |

    FAA Issues Final Rule on Pilot Fatigue

    WASHINGTON, D.C. – U.S. Transportation Secretary Ray LaHood and Federal Aviation Administration (FAA) Acting Administrator Michael Huerta today announced a sweeping final rule that overhauls commercial passenger airline pilot scheduling to ensure pilots have a longer opportunity for rest before they enter the cockpit.

    “This is a major safety achievement,” said Secretary LaHood. “We made a promise to the traveling public that we would do everything possible to make sure pilots are rested when they get in the cockpit. This new rule raises the safety bar to prevent fatigue.”
    “Every pilot has a personal responsibility to arrive at work fit for duty. This new rule gives pilots enough time to get the rest they really need to safely get passengers to their destinations,” said FAA Acting Administrator Huerta.

    The Department of Transportation identified the issue of pilot fatigue as a top priority during a 2009 airline Safety Call to Action following the crash of Colgan Air flight 3407. The FAA launched an aggressive effort to take advantage of the latest research on fatigue to create a new pilot flight, duty and rest proposal, which the agency issued on September 10, 2010.

    Key components of this final rule for commercial passenger flights include:
    Varying flight and duty requirements based on what time the pilot’s day begins. The new rule incorporates the latest fatigue science to set different requirements for pilot flight time, duty period and rest based on the time of day pilots begin their first flight, the number of scheduled flight segments and the number of time zones they cross. The previous rules included different rest requirements for domestic, international and unscheduled flights. Those differences were not necessarily consistent across different types of passenger flights, and did not take into account factors such as start time and time zone crossings.

    Flight duty period. The allowable length of a flight duty period depends on when the pilot’s day begins and the number of flight segments he or she is expected to fly, and ranges from 9-14 hours for single crew operations. The flight duty period begins when a flightcrew member is required to report for duty, with the intention of conducting a flight and ends when the aircraft is parked after the last flight. It includes the period of time before a flight or between flights that a pilot is working without an intervening rest period. Flight duty includes deadhead transportation, training in an aircraft or flight simulator, and airport standby or reserve duty if these tasks occur before a flight or between flights without an intervening required rest period.
    Flight time limits of eight or nine hours. The FAA limits flight time – when the plane is moving under its own power before, during or after flight – to eight or nine hours depending on the start time of the pilot’s entire flight duty period.

    10-hour minimum rest period.The rule sets a 10-hour minimum rest period prior to the flight duty period, a two-hour increase over the old rules. The new rule also mandates that a pilot must have an opportunity for eight hours of uninterrupted sleep within the 10-hour rest period.

    New cumulative flight duty and flight time limits.The new rule addresses potential cumulative fatigue by placing weekly and 28-day limits on the amount of time a pilot may be assigned any type of flight duty. The rule also places 28-day and annual limits on actual flight time. It also requires that pilots have at least 30 consecutive hours free from duty on a weekly basis, a 25 percent increase over the old rules.
    Fitness for duty. The FAA expects pilots and airlines to take joint responsibility when considering if a pilot is fit for duty, including fatigue resulting from pre-duty activities such as commuting. At the beginning of each flight segment, a pilot is required to affirmatively state his or her fitness for duty. If a pilot reports he or she is fatigued and unfit for duty, the airline must remove that pilot from duty immediately.

    Fatigue Risk Management System. An airline may develop an alternative way of mitigating fatigue based on science and using data that must be validated by the FAA and continuously monitored.

    In 2010, Congress mandated a Fatigue Risk Management Plan (FRMP) for all airlines and they have developed these plans based on FAA guidance materials. An FRMP provides education for pilots and airlines to help address the effects of fatigue which can be caused by overwork, commuting, or other activities. Airlines will be required to train pilots about the potential effects of commuting.
    Required training updates every two years will include fatigue mitigation measures, sleep fundamentals and the impact to a pilot’s performance. The training will also address how fatigue is influenced by lifestyle – including nutrition, exercise, and family life – as well as by sleep disorders and the impact of commuting.
    The estimated cost of this rule to the aviation industry is $297 million but the benefits are estimated between $247- $470 million. Covering cargo operators under the new rule would be too costly compared to the benefits generated in this portion of the industry. Some cargo airlines already have improved rest facilities for pilots to use while cargo is loaded and unloaded during night time operations. The FAA encourages cargo operators to opt into the new rule voluntarily, which would require them to comply with all of its provisions.

    The final rule has been sent to the Federal Register for display and publication. It is currently available

    at:http://www.faa.gov/regulations_policies/rulemaking/recently_published/media/2120-AJ58-FinalRule.pdf, and will take effect in two years to allow commercial passenger airline operators time to transition.

    A fact sheet with additional information is at http://www.faa.gov/news/fact_sheets/.

    To include the featured image in your Twitter Card, please tap or click their icon a second time.
  • |

    Butler National Expands Presence in Brazil With Significant New Orders From OceanAir

    OLATHE, Kan., Feb. 15, 2011 — Butler National Corporation (OTC Bulletin Board: BUKS), a leader in the growing global market for structural modification, maintenance, repair and overhaul (MRO) has been retained by OceanAir, a Brazilian MRO company, to perform special mission modifications on three Learjet Model 35 airplanes. OceanAir is part of Synergy Group.

    “This is a highly specialized modification and electronics integration package,” said Jose Efromovich. “We would only entrust such technically sophisticated work to Butler’s Avcon Group. We have been working with Butler for three years and look forward to our continued relationship as we keep expanding in the rapidly growing Latin American market.”

    Christian Vila, Director of Latin & South American sales for Butler National added, “Avcon is the leading provider of Learjet modifications in Brazil. We believe we will see strong demand for this and other Avcon modifications in the future including commercial aircraft.” Synergy Group, which is the parent company of OceanAir, also owns 67% of AviancaTaca with approximately 150 aircraft.

    Butler National’s expanded presence in Brazil continues its effort to leverage a major global growth trend in aviation. According to recently published reports the global deliveries of new aircraft are projected to total 56,900 by 2029 and the total global fleet will approach 70,000 for commercial and business aircraft. This represents more than $3 trillion in value with most of the growth coming from Latin American, Asia and the Middle East.

    To include the featured image in your Twitter Card, please tap or click their icon a second time.
  • |

    NTSB TO HOLD SYMPOSIUM ON AIRLINE CODE-SHARING ARRANGEMENTS AND THEIR ROLE IN AVIATION SAFETY

    National Transportation Safety Board
    Washington, DC 20594
    August 16, 2010

    The National Transportation Safety Board will hold a two-day symposium on the role that airline code-sharing arrangements play in aviation safety. The event, chaired by NTSB Chairman Deborah A.P. Hersman, will be held on October 26-27, 2010, in Washington, DC.

    Code-sharing is a marketing arrangement in which one airline places its designator code on a flight operated by another airline, then sells and issues tickets for that flight.

    Recent NTSB investigations of accident flights operated under code-sharing arrangements include the February 2009 accident near Buffalo, New York, in which a Colgan Air flight was operated as Continental Connection; a 2007 accident in Traverse City, Michigan, in which a Pinnacle Airlines flight was operated as Northwest Airlink; a 2007 accident in Cleveland, Ohio, in which a Shuttle America flight was operated as Delta Connection; and a 2006 accident in Lexington, Kentucky, in which a Comair flight was operated as Delta Connection.

    Today, most airlines participate in some type of code- sharing arrangement, either with domestic or international partners. More than half of passenger enplanements in the U.S. this year are on regional airlines, almost all of which are involved in code-sharing arrangements.

    “In the past twenty years, code-sharing arrangements have so proliferated within commercial aviation that today the vast majority of airlines are involved in what are often complex business and operational arrangements.” said NTSB Chairman Deborah A.P. Hersman. “We have investigated many accidents in which passengers bought tickets on a major carrier and flew all or part of their trip on a different carrier – one that may have been operating to different safety standards than the carrier that issued the ticket. While all carriers are required to meet minimum standards, a clearer picture and deeper understanding of the best safety practices for code-sharing arrangements are the goals of this symposium.”

    The symposium will be organized to elicit information on the following three issue areas: (1) structures, practices, and oversight of domestic and international code-sharing arrangements; (2) best practices regarding the sharing of safety information between airlines and their code-sharing partners; and (3) the role that a major airline would have in the family disaster assistance response for an accident involving a code-sharing partner.

    These areas will be explored through presentations from major and regional airlines, industry organizations, and representatives of the traveling public.

    The symposium, “Airline Code-Sharing Arrangements and Their Role in Aviation Safety” will be held at the NTSB Board Room and Conference Center, located at 429 L’Enfant Plaza, S.W., Washington, DC. A detailed agenda will be released closer to the date of the event.

    To include the featured image in your Twitter Card, please tap or click their icon a second time.
  • Mexican Interjet to Install Mechtronix A320 Level D Simulator

    Fast Expanding Airlines Continue to Adopt Mechtronix Train@Home Business Model

    MONTREAL, Dec. 6, 2010 /PRNewswire/ — Mechtronix Systems Inc., an MWC company, a world leading manufacturer of Flight Simulation Training Devices (FSTD), today announced that Mexican Interjet is opening a brand new training facility in Toluca, equipped with an A320 FFS X™ to train their pilots at their operations base. This will be Interjet’s first FFS and the first A320 full motion simulator to be installed in Mexico in twelve years. Interjet’s pilots will have unlimited access to the device at their home base of operation in Toluca; optimizing crew coverage while lowering training costs by reducing time off the line and travel expenses. The state-of-the-art unit provides an easier access to training and enables Interjet to perform 100% of initial and recurrent training at their base of operations. It will be evaluated by the Mexican Aviation Authorities, Direccion General de Aviacion Civil, following FAA 14 CFR Part 60 standard for Level D.

    “Our current A320 fleet of 22 plus the 12 to come justify having our own training center. Now we can cut drastically our crews training costs and enhance productivity. Other A320 operators in the region can also benefit from our state-of-the art facility and Toluca’s convenient location. We selected Mechtronix after a careful examination of FSTD manufacturers. We’re delighted with their professionalism, product quality and technical skills demonstrated throughout the different stages of the project and today,” said Jose Luis Garza, Interjet CEO.

    “We are thankful for the trust granted to Mechtronix by the very senior management of Interjet; and installing an A320 FFS X™ in Mexico is another achievement from Mechtronix as it adds up to our Airbus references worldwide and strengthens our presence in this dynamic part of the world,” explained Mechtronix President Xavier Herve. “Our Train@Home business model allows growing airlines’ pilots to train at operations home base in ground-breaking simulation technology at a reasonable cost. Interjet’s fast growing fleet of 22 A320 aircraft justified the investment in a Level D FFS and with such innovative equipment, Interjet will offer top-quality A320 flight training, thus contributing to the further raising of training standards in Mexico. It was a real pleasure working together on this project and we trust Interjet will be highly satisfied with their new simulator.”

    The A320 FFS X™, a highly cost-effective and easy-to-operate platform, enables the airline to save time and money. Built to Airbus standard 1.6, the A320 unit offers the highest Level D fidelity together with an electric motion system and a collimated visual system that comes with a library of specifically customized airports including Mexican cities to which the airline provides service — Mexico, Toluca, Monterrey, among others.

    To include the featured image in your Twitter Card, please tap or click their icon a second time.
  • |

    Boeing, Copa Airlines Complete Order for 22 Next-Generation 737s

    WASHINGTON, Nov. 30, 2010–Boeing (NYSE: BA) and Copa Airlines today announced an order for 22 Next-Generation 737-800s at a signing ceremony at the U.S. Department of Commerce in Washington, D.C. The order previously was attributed to an unidentified customer on Boeing’s orders and deliveries website.

    “We thank Copa Airlines for this significant order and are very proud to partner with one of the most successful airlines in the industry,” said Jim Albaugh, president and CEO of Boeing Commercial Airplanes. “Copa’s exceptional business model, ideal geographic position and modern and efficient fleet will continue to drive its leadership in the Latin American aviation market.”

    “These 22 firm aircraft plus 10 options, which deliver between 2015 and 2018, are an integral part of our medium term growth plan,” said Pedro Heilbron, CEO of Copa Airlines. “This is the largest aircraft order in Copa’s history, which is a reflection not only of our confidence in the future of Latin America and Panama, but also of our successful business model, which has made our Hub of the America’s the best connecting point for intra-Latin America travel.”

    The 22 firm airplanes are valued at approximately $1.7 billion at list prices and nearly double Copa’s existing Next-Generation 737 fleet. The order is the largest new aircraft order in Copa Airlines’ history and is part of the airlines’ plan to continue to grow its fleet to meet market demands for new-generation, more fuel-efficient airplanes.

    “Today’s signing not only celebrates the strong relationship between Boeing and Copa Airlines, but also symbolizes the strong political and commercial ties between the United States and Panama,” Albaugh said.

    The new airplanes will be outfitted with the 737 Boeing Sky Interior featuring new modern sculpted sidewalls and window reveals that provide passengers with a greater connection to the flying experience. They also will benefit from performance improvements expected to result in a 2 percent reduction in fuel consumption through a combination of airframe and engine improvements. The performance improvements will be delivered beginning in mid-2011 through early 2012.

    Operating out of the “Hub of the Americas” in Panama City, Copa provides service to 46 destinations in 24 countries.

    In the past two years, Copa has purchased 37 Next-Generation 737-800s new from Boeing and entered into leasing agreements for an additional 10.

    To include the featured image in your Twitter Card, please tap or click their icon a second time.
  • Oct 14: EASA: Thales Air Directive

    The following revised ETSO is replacing ETSO-C16 in Subpart B Index 1 table of content:

    ETSO-C16a Electrically Heated Pitot And Pitot-Static Tubes

    ————
    ED Decision 2009/014/R
    14/10/2009
    Annex II
    ETSO-C16a
    Date: 21.10.09
    European Aviation Safety Agency
    European Technical Standard Order
    Subject: ELECTRICALLY HEATED PITOT AND PITOT -STATIC TUBES

    To include the featured image in your Twitter Card, please tap or click their icon a second time.